If you are reading this article, then the probable chance is that you have finally decided to get a tonneau cover for your Toyota Tacoma. And I must congratulate you on this decision, as it is single-handedly one of the best upgrades you can give to your truck.
It does not only protect against the elements of nature but against prying eyes and thieves too. So, I have written this article, especially for all people looking for best tonneau cover for Tacoma. These nine covers will surely fulfill your needs and also help in safekeeping your belongings.
9 Top Best Toyota Tacoma Tonneau Covers Comparison
1. BAK BAKFlip MX4 Hard Folding Truck Bed Tonneau Cover
I am going to be honest with you. Before starting my research for this article, I was expecting a BAK product to take one of the top three places on this article, and I was right. Coming at the first number is the MX4 Hard Folding Truck Bed Tonneau Cover by BAK.
The brand itself makes tonneau covers for all sorts of trucks and has mostly positive reviews. This one for Tacoma is a real-life example of such a product.
This MX4 has been designed for all Toyota Tacoma models, ranging from the years 2016 to 2021. A large chunk of Tacoma owners have a version from this year’s range, so they will be very happy with these. As these are hardcover, the panels are made out of solid aluminum.
They provide a complete layer of protection that will keep all your belongings safe and secure. What’s even better is that it even helps in waterproofing the bed of your truck. Whether it be snow, rain, or wind, your cargo will stay intact and isolated.
It can even support 400 pounds of evenly distributed weight, which means if you run out of space at the back of your truck, the cover can be used to transport some stuff.
With tireless efforts from the engineers at BAK, the cover does not block the bed by any means. It even comes with a five-year warranty. It is more than enough time for any inconsistencies to come to the surface if there are any.
- Aluminum build
- It can support 400 pounds of weight
- Full bed access
- Five-year warranty
This product by tonneau truly deserves the first spot on this article or any other list, for that matter. It has excellent features and secures your truck too.
2. TruXedo TruXport Soft Roll Up Truck Bed Tonneau Cover
Some enthusiasts prefer soft covers over hard ones and I can understand their point of view. Soft tonneau covers provide a decent security level, is much easier to use, and are almost guaranteed to get full bed access every single time, no matter which manufacturer you choose.
The same is the case with the TruXedo TruXport, a superior cover that fits all versions of the Toyota Tacoma, released in the years 2016 to 2021. Everything about this TruXedo cover aims to simplify how you use a tonneau cover. And, judging by over 500 reviews, it looks like the company was successful.
In terms of durability and material, TruXedo is one brand you can buy from without any hesitation. This brand is made of leather-grained vinyl, which is completely tear proof. Even the rails provided are of high quality, making sure the cover stays intact wherever you go.
Moreover, some people might expect that with a softcover, you might not get adequate weather protection.
But they are wrong in the case with TruXedo. These are built to keep the weather out, keeping your cargo dry and safe.
Thanks to the tarp tension adjustment feature, you can tighten it when the temperatures change. This ensures you always get adequate protection from various weather conditions such as rain or snow.
Just like the MX4 by BAK, this one also comes with a five-year warranty. It can be claimed if there are any fault which has come to your attention and are not the result of improper usage.
- Easy to install
- Leather grained vinyl
- Tension adjustment
- Five-year warranty
Feel free to buy this tonneau cover, as it is really the excellent choice out there if you are looking for a good softcover for your truck.
3. Gator ETX Soft Tri-Fold Truck Bed Tonneau Cover
Did I tell you how tough it was to place the items on this article? Well, the competition really cut close this time. Well, coming in the top third spot is the ETX Soft Tonneau Cover by the Manufacturer Gator.
Made for the 2016 to 2020 models of the Toyota Tacoma, they use high-quality vinyl installed on an aluminum frame. Combine both of these, and you get a tonneau cover that will exceed your expectations in every way.
It has unparalleled waterproofing capabilities. Not only that, but it will also keep snow and the wind out, creating an environment of isolation for your cargo, saving it from any damage.
The installation and the usage is as simple as it gets. The installation will take a maximum of ten minutes.
You don’t even need a wrench and a socket, which is commonly needed to install one, let alone a drill that is used to bore holes into the chassis of your truck.
If you want to open it up, the panels can be folded easily and then secured into place with the integrated buckling system. Because the ETX is designed for each truck model, it is guaranteed to have a tight and perfect fit. The design is clean and minimal, so your Tacoma does not stand out.
Gator steals the show with their warranty. It provides a lifetime warranty, which means that you can claim a free-of-cost replacement if there is any problem with your cover, which hinders its usage.
- Easy to install
- Easy to use
- No-drill installation
- Industrial-grade vinyl
- Lifetime warranty
- Partial access to the bed
Gator managed to create a solid cover that should be able to keep most users happy. And according to more than 700 reviews I have seen, it looks like people are very pleased with it.
4. Undercover Ultra Flex Hard Folding Truck Bed Tonneau Cover
Coming in fourth place on this highly competitive list is the Tonneau Cover by Undercover. As cool as the name is, the brand also makes spectacular covers that many people have reviewed, and just like the first three, the Ultra Flex has almost all positive reviews. It is available for the 2016 to 2021 models of Tacoma.
Now, many of you might be wondering, when will the covers for older models be reviewed too? To them, I say don’t worry. For older models of Tacoma, some pretty superb covers are coming down the line.
These come in two sorts of coatings, glossy or matte. You can choose from either two, and it will look and excellently match your truck. Choose either of the two finishes; the end product sits completely flush with the bed, creating a stealthy look.
The panels are made out of aluminum, which is extremely durable and protects your luggage from various weather conditions. The panels have an easy-to-use mechanism.
They latch automatically and can be opened using any one of the two pull cables that are installed. Even the installation process is very easy. There is no need to drill holes in the chassis of the truck. It can be clamped directly without the use of any special tools.
- Aluminum panels
- Flush design
- Glossy or matte finish
Whether it be TruXedo, BAK, or Undercover, you cannot go wrong with their products. The Ultra Flex is a great option to consider if you are looking for a hardcover that is easy to use.
5. TruXedo Lo Pro Soft Roll Up Truck Bed Tonneau Cover
So, you really liked the TruXport, but are looking for an option for older Tacoma models; I have you covered. Coming yet Another Product from TruXedo, the Lo Pro is a roll-up cover that supports all models of the Tacoma ranging from 2005 to 2015.
That is a whole decade of models, and for me, that’s truly impressive. What’s more awesome is that no feature has been left behind to support such a wide range of cars. It is just a fine piece of engineering that all Tacoma owners love.
TruXedo claims that the Lo Pro is America’s best-selling tonneau cover. Given the solid build and a decent price tag, I say it’s no wonder it has so much popularity. Just like the TruXport, this one also uses leather-grained vinyl.
Why I stress on this is because is leather greatly increases the durability and tear resistance of vinyl. It also is waterproof to the extent that water droplets roll right off. You also get a seal from all types of weather conditions. Your belongings will stay safe, secure, and isolated with this TruXedo product.
Lo Pro is the short form of low profile. That is what this cover is designed to be. It barely lifts above the bed, only by a quarter of an inch. It also has an easy installation. You can install one using only thirty minutes of your time. You don’t have to destroy Tacoma’s chassis by drilling into it.
- Easy to install
- Leather grained vinyl
- Limited lifetime warranty
- The gap between the cover and tailgate in some units
TruXedo taking up two places on this article is very impressive. The Lo Pro is an example of a cover that combines looks and practicality.
6. Extang Trifecta 2.0 Soft Folding Truck Bed Tonneau Cover
I must admit, I have written many articles in which I am hunting for the best tonneau covers for various trucks, and the most common brands are the same ones I have mentioned here.
Even Extang is one of the companies which make covers for all sorts of trucks. They really put in their time and experience to give the consumers an excellent product such as the Trifecta 2.0 Truck Bed Tonneau Cover.
The 2.0 is a soft folding cover, just like many other options I have mentioned above. It is available for 2016 to 2020 models of the Toyota Tacoma. Some unique features on this cover, such as the EZ-Lock clamps, make it stand apart from the competition.
These two clamps have to be pulled, and then the leather-grained fabric can be folded easily. This leather-grained fabric has marine-grade material used to ensure it provides you with unparalleled levels of waterproofing, as well as making sure its appearance does not get dull over time.
They also claim that they have the fastest installation period. It comes preassembled outside the box and just has to be tightened to the rails. There is no need to get some special tools which some brand requires.
The overall waterproofing is great too. Snow and water don’t have a chance in front of this cover.
- EZ-Lock clamps
- Leather grained fabric
- Quick installation
There you have it, another cover that has no faults or problems reported by users. It is a great option for people looking for an affordable and feature-rich tonneau cover.
7. LEER HF650M Quad Folding Tonneau Cover
Right up till now, this article has been dominated by brands that are already world-renowned for their superior quality tonneau covers. Some buyers would like to try out something different and unique. For those people, behold the HF650M by the Company LEER.
Many of you might not have even heard of the name of the brand, and that’s exactly the point. Some companies are caught in the shadows of popular brands, and their products are overlooked.
That is certainly not happening here. LEER uses fiberglass-reinforced polymer instead of the more commonly found aluminum in all hardcovers. The four panels allow for a quad-fold, giving you more relaxation regarding how much of the bed you want to access.
It even locks in an upright position and does not lie on the back of the truck. The durability can be seen because it can support up to 450 pounds of weight on top of it. That is more than any other hardcover on this article.
The thinner rails allow for a low profile, a flush installation that is subtle, stealthy, and stylish. Apart from the appearance, it also allows for more storage space inside the truck’s bed. The CYNC latching system makes the usage of these extremely easy and convenient.
- Easy installation and usage
- Fiberglass reinforced polymer
- It can support 450 pounds of weight
- Flush installation
- Fewer reviews
LEER makes a product which, at least on paper, performs in a unique manner of their own. If it is the real deal, then you will be getting a terrific product that will keep you satisfied for years to come.
8. BAK BAKFlip FiberMax Hard Folding Truck Bed Tonneau Cover
So, another manufacturer can earn two spots on this extremely picky and narrowed down list. BAK is a company that makes tonneau covers that can be described using one word, stellar. Yes, that’s right. FiberMax is Another Example of Such a Product.
These tonneau covers support a variety of Tacoma models, ranging from 2005 to 2015. That means it is available for the majority of Tacoma owners. The word FiberMax may have been enough to tell you that just like the LEER cover, this one also uses fiberglass-reinforced polymer.
It is extremely durable, even more durable than aluminum in some regards, like when it comes to denting. Thanks to the automatic latching system, the panels are held in place.
There are strings on both sides of the cover. You can pull either one to loosen the latches and then fold the whole contraption. It’s that easy.
Even the installation has the same level of easiness. No need to drill holes into the body of your truck when you can use a wrench and socket only. The struts included in the assembly ensure there is no fluttering, even when the cover is opened completely.
- Easy to install
- Dent and scratch-resistant
- Automatic latching system
- No-drill installation
- Fewer reviews
Although I would trust BAK with any product, they would release it. The problem is that fiberglass-infused polymers have not been tested extensively by many users. If it is as good as how the manufacturer says it is, you will not get a more durable tonneau cover than this one.
9. Roll-N-Lock M-Series Retractable Truck Bed Tonneau Cover
The last and final place is the LG507M, a Cover by the Company Roll-N-Lock. Personally, I think that name is awesome. But what’s greater is that this tonneau cover is unlike any other option on this article.
It does not fold or open traditionally but retracts. Yes, that’s right. The cover retracts to be used in any position, closed, partially opened, or fully opened. This product by Roll-N-Lock is designed to be used by the majority of Tacoma owners.
These are compatible with 2005 to 2015 models. They assure that it has the smallest and most compact canister compared to any retractable tonneau cover on the market.
I don’t know why more companies start making this design available to more consumers, as it is easy to use and install. These are part of the brand’s M-Series which combines all aspects of a good tonneau cover in one compact package.
It combines the durability and security of aluminum, the stealthy look of a softcover, and the easy-to-use nature of a retractable cover to make a solid product which you will fall in love with.
The patented four-point locking system is there to ensure the cover works simultaneously with the tailgate to be locked at the same time.
- Retractable design
- Four-point locking system
- Easy to use and install
- Poor waterproofing capabilities
If Roll-N-Lock had tested their tonneau cover thoroughly, the waterproofing problem would not have been seen in the final product. Other than that, being a retractable cover, its convenience to use cannot be beaten.
No one should ever underestimate the importance of a tonneau cover. Tacoma owners have tried, tested, and recommended them just because of the added convenience.
The nine products I mentioned above covered hard, soft, and even retractable covers. But for me, the title of the best tonneau cover for Tacoma goes to the BAK BAKFlip MX4.
It just stands out as a clear winner in the vast sea of endless covers. Being a hard folding cover, you will not get a better option out there. It does not even have any faults or drawbacks.
There is a reason it was placed on the number one spot on this article. Even if you choose any other option from this list, it will be more than enough to satisfy your needs.