Have you finally decided to change the exhausts on your car then believe me, it is an excellent decision. To clear all of your confusion; yes, your car will sound like a beast after installing one, and it will perform noticeably better than before.

I have compiled and narrowed down this article to feature only the best exhaust system for Toyota Tacoma, and they will make you fall in love with your car more than you already do.

The Tacoma is a beast on its own. But it does lack in the performance department just by a little bit. I can assure you that won’t be the case ever again if you choose an exhaust from this list.

8 Top Best Toyota Tacoma Performance Exhaust Comparison

1. Flowmaster 17432 Dual Side Exhaust System

Here we go, starting this article in a mighty manner is the Flowmaster 17432 Dual Side Exhaust System, a beastly exhaust system, which blew away the competition, and even me when I read about its vast list of features and advantages.

The use of aluminized steel instead of stainless steel makes sure you get almost the same durability level while being significantly cheaper.

Aluminized steel is also much more rust and corrosion-resistant than stainless steel. Rust not only destroys the attractive look of the product but, in the long term, lessens the lifespan too.

They chose to implement mandrel-bent tubing in this exhaust, allowing for bending the pipe extremely tightly without it cracking or wrinkling. The bend can also not be flattened out when there is extreme pressure.

The most common caveat of owning an aggressive sound exhaust is the droning sound which becomes noticeable at high speeds. This is not the case with these. You push your engine to its limit and still notice no droning.

They are very easy to install and can be installed without a mechanic’s aid that may charge you extra. You just need the right tools and the proper YouTube tutorials which will guide you to install it.

Flowmaster was also kind enough to include a three-year warranty with these. It covers any manufacturing defects that may have occurred due to improper workmanship.

If you are unlucky enough to get such a product, it is eligible for a free-of-cost replacement. It must be noted that rusting and damage due to the wrong usage cannot be claimed, as it is not the company’s fault.

These are a bit heavy, that’s all. That doesn’t mean this is a disadvantage. You may need a helping hand while installing it.
  • Very durable
  • Rust and corrosion-proof
  • Easy to install
  • Perfect sound
  • Very heavy

Overall, this system is an excellent piece of hardware. It is easy to install, has a decent feature set, and is very durable. So, it definitely deserves the first position.

Flowmaster 17432 Dual Side Exhaust System
Flowmaster 17432 Dual Side Exhaust System


We earn a commission if you click this link and make a purchase at no additional cost to you.

2. MBRP S5338P Cat Back Exhaust System

MBRP makes high-quality exhausts that are priced very competitively. The S5338P Cat Black Exhaust System is an example of such an exhaust system. Each exhaust by MBRP is tailor-made to fit a specific vehicle and, in this case, this product is for Toyota Tacoma.

It has been designed to ensure you get maximum exhaust flow while getting excellent sound and a decent boost in performance. You will get the most out of your vehicle with improved horsepower and torque to give you the edge over your competitors if you like to go racing frequently.

To combat rust and corrosion, MBRP has implemented aluminized steel as the main manufacturing material in the exhaust. Moreover, it has almost the same endurance and durability as stainless steel and has better rust and corrosion protection.

Since each exhaust is tailor-made for each vehicle, they have a bolt-on installation. This makes the installation process much easier and simple.

There is no cutting or welding required as it will fit the Toyota Tacoma perfectly. You can install one within the span of two hours, from the comfort of your own house.

MBRP offers a one-year warranty with their exhaust. I know it is shorter than the Flowmaster one, but it is still more than enough for any manufacturing defect to the surface during the course of its usage.

Lastly, the warranty covers any manufacturing defect such as leaking as will make you eligible for a free of cost replacement. Rusting, corrosion, and damage will not be considered as every exhaust will be used differently and in a different environment.

After some research the only drawback is that they fit only recent models of the Toyota Tacoma. These models range from 2016-2021. Older models cannot use them.
  • Relatively inexpensive
  • Highly durable
  • Rust and corrosion-proof
  • Increased horsepower
  • Only available for newer models

They will make noticeable performance as compared to your stock ones. It has a bolt-on installation and is durable. Choosing this as your exhaust will keep you satisfied for years to come.

MBRP S5338P Cat Back Exhaust System
We earn a commission if you click this link and make a purchase at no additional cost to you.
04/17/2022 04:09 am GMT

3. Borla 140680 Exhaust System

Borla is one company that continuously impresses me whenever I write about one of their products. They make high-quality exhaust systems that have little to no drawbacks.

Even the reviews by people who have tested it extensively have only positive things to say about it. The Borla 140680 Exhaust System is another example of fine engineering.

They are the pioneers of using stainless steel and have been using it for well over 30 years. Stainless steel is an extremely durable material that can survive through thick and thin. And its use in an exhaust system means that it will probably last longer than your vehicle.

These are completely rust and corrosion-proof, making it one of the best options available out there. Even after extensive use, it will not lose its shine in terms of appearance and performance.

They guarantee an increase of horsepower and torque by up to 10%. Now, that is a lot. A 10% increase means that you will get not only better speeds but improved fuel economy. That is what most people are after, the perfect balance between power and fuel consumption.

To reduce humming and droning, there is also a muffler that can be installed if you want. It also helps in regulating the loud sound, so you get only the performance boost. The manufacturer really thought about all types of exhaust enthusiasts while manufacturing this model.

I follow Borla’s exhausts for a reason. They make stellar exhausts that always impress consumers and reviewers alike. They offer things that most manufacturers do not. An example of that is the million-mile warranty that is being provided with these.

Reaching a million miles is considered an accomplishment of its own. You are basically getting a lifetime warranty which ensures a free replacement if there is any manufacturing defect.

This exhaust system has no drawbacks. You buy it with complete peace of mind, as there are no known issues in this model as of yet.
  • Stainless steel build
  • Extremely durable
  • Easy to install
  • Aggressive sound
  • None

If you would like to change your exhaust preferences frequently, like getting only a performance boost only or sometimes a full overhaul including the loud and aggressive sound, this Borla exhaust is suitable for you.

Borla 140680 Exhaust System
We earn a commission if you click this link and make a purchase at no additional cost to you.
04/17/2022 05:55 am GMT

4. MagnaFlow 15811 Performance Exhaust System

The MagnaFlow 15811 Performance Exhaust System is a US based manufacturer that excels in making superior exhaust systems that many people have positively reviewed.

Their performance series has been tailor-made to squeeze every bit of energy to ensure it performs adequately, accompanied by a loud and booming sound that will turn heads wherever you go.

Like the Flowmaster exhaust, this one has mandrel-bent tubing that allows for the quickest and most efficient flow of exhaust gases generated by the engine. These gases prohibit the engine from working at its maximum capacity. They are efficiently dispersed for proper engine working.

The use of stainless steel ensures you get top-notch durability and heat dissipation, which most companies do not address while making exhausts. The steel guarantees it can survive in any environment and still be as functional as the day you bought it.

They include all the nuts, bolts, and hangers you need for easy installation. The installation process is easy and requires basic tools, mostly available in all car enthusiasts’ homes.

Even if you are a beginner that just wanted a new exhaust, there are plenty of tutorials available on the internet that details step by step how to install one.

Although it is incomparable with the million-mile warranty that Borla provides, MagnaFlow gives the buyer a two-year or twenty-five thousand-mile warranty, whichever comes first.

All manufacturing defects will be considered to provide the user with a free replacement. The surprising part is that the brand is sure about the stainless steel quality that they even cover rusting under warranty.

The drawback I’d like to share is that the included muffler doesn’t work right and does not dampen the sound too much. So, it is better to get a new one.
  • Stainless steel build
  • Extremely durable
  • Loud and aggressive sound
  • Rust and corrosion-resistant
  • Poor-performing muffler

Well, there you have it. This MagnaFlow exhaust is one of the excellent options out there. The only drawback is that the included muffler has to be changed because it does not perform as advertised. Other than that, it is an excellent piece of hardware.

MagnaFlow 15811 Performance Exhaust System
We earn a commission if you click this link and make a purchase at no additional cost to you.
04/17/2022 12:19 am GMT

5. Gibson 618814 Stainless Cat-Back Single Exhaust System

Gibson is another highly regarded brand, and just like Borla, whenever one of their products comes into view, it never ceases to impress me. The Gibson 61884 Exhaust System is a live example of such a product. It is a superb exhaust which will boost your performance and fuel consumption, likewise.

This is a single-sided exhaust which has been built using stainless steel. The mandrel tubing ensures there are no kinks or cracks that may occur at the turns when under heavy pressure.

The stainless steel also acts as a great temperature distributor. The gases that leave the engine have a high temperature. So, the steel can handle it easily.

It also conducts and distributes it effectively, so no part can deform due to the high temperature. Stainless steel is also resistant to rust. It will shine even after rough usage. The muffler included in this package has a chambered design that ensures no droning while traveling at high speeds.

The sound of the exhaust itself is also loud and booming. This sound is produced by removing gases, so a loud sound is basically your assurance that the gases are removed as efficiently and as quickly as possible.

Since it has been built to be used for the Toyota Tacoma, it has a bolt-on installation. All important parts, such as hangers and bolts, are included in the box.

Moreover, the installation can take no more than two hours, even for a beginner doing it for the first time. There is no need for cutting, welding, and any extra steps to ensure it fits your Tacoma.

Gibson goes head to head with Borla when it comes to warranty. They provide a limited lifetime warranty which can be claimed and is valid for as long as the vehicle in which the exhaust was installed is still owned by the same person who bought it.

During this period, all manufacturing defects are covered. There is also rust through warranty, which means if rust has penetrated the surface to compromise the exhaust’s inner working, then that is also eligible for a replacement.

You can buy this brand with complete peace of mind. There are no drawbacks to owning it. There are also no reports of any major manufacturing faults that may arise after extensive usage.
  • Mandrel-bent tubing
  • Extremely durable
  • No welding required
  • Improved performance and torque
  • None

Gibson never ceases to impress their customers. Although I don’t own it, this exhaust will serve you without any problems.

Gibson 618814 Stainless Cat-Back Single Exhaust System
We earn a commission if you click this link and make a purchase at no additional cost to you.
04/17/2022 12:23 am GMT

6. aFe Power 49-46034 Exhaust System

Coming in at sixth place is the 49-46034 Exhaust System by aFe Power. Though it is pricier, aFe chose to use stainless steel as the major construction material in them. It is highly durable and is rust and corrosion-resistant when it comes to taking your vehicle off-road.

The mandrel-bent tubing ensures it does not flatten out when the exhaust undergoes rough usage. The sharp turns also help create the quickest and most efficient path for the gases to leave the vehicle, giving the engine enough headroom to work efficiently.

So, due to their excellent construction, you can rest assured that there will be maximum airflow at low temperatures which considerably aids in reducing fuel consumption.

There is a muffler included in the box works great and efficiently reduces loud sounds and reduces droning and humming, which are common in exhausts when traveling at high speeds.

Most of the people who have install these in their vehicles; they aim to get a loud and booming sound. Well, that is the case with this one. It produces an extremely loud sound that will help you become the center of attraction wherever you go.

The installation is also extremely easy because it has been built for Toyota Tacoma. So, that means it has a bolt-on installation that does not require any cutting or welding to ensure a proper fit.

For long bed trucks, there is an extension tube also included, so you won’t need to buy one separately. The hangers help in stopping pipe movement when the car is being used for intensive purposes.

They are also offering a two-year warranty that may be claimed if there is any manufacturing defect or factory problem not caused by your usage.

There is also the option to get a partial refund of 80% if you want to return it. But the condition is that it does not have to be opened or used at all.

Strangely enough, aFe did not include any bolts for installation. You have to buy them separately, which may be a hassle for some people.
  • Mandrel-bent tubing
  • Stainless steel construction
  • Extremely durable
  • Easy to install
  • Efficient gas dispersal
  • No bolts for installation

I don’t know who at aFe made the decision not to include installation bolts in the box. They cost practically nothing, and yet they were missing.

Other than that, the exhaust itself is a durable product that will greatly help in getting the performance boost you deserve.

aFe Power 49-46034 Exhaust System
We earn a commission if you click this link and make a purchase at no additional cost to you.
04/16/2022 07:29 pm GMT

7. Borla 140140 Cat Back Exhaust System

I did not expect such a competition when it came to searching for exhausts for the Toyota Tacoma. This article has been dominated by extremely popular brands, some taking two positions, like this 140140 Cat Black Exhaust System by Borla.

They state if you don’t have a Borla product, then you are not using the best out there. Now that’s what you call courage. Just like all Borla exhausts, are made out of complete stainless steel. That means it is the most durable choice of material out there.

There is no chance of the tubes flattening out, thanks to mandrel tubing, which allows for sharp turns without compromising on the structure. It also allows for mapping the most efficient path for the removal of gases from the engine.

Naturally, the exhaust is also rust and corrosion-proof which helps increase its lifespan in the long run.

Rusting is the most common problem that occurs in exhausts which really affects the usage as, after a few years, it penetrates the surface and compromises the working of the product. That is not the case with this Borla exhaust.

Borla uses two of their patented technologies to ensure you can get every bit of performance from your car and enjoy every joyride. The first is their proprietary straight-through design which does not use chambers which greatly accelerates the removal of exhaust gases.

The multicore design uses steel wool which absorbs plenty of sounds, so it doesn’t distort too much. The final result is the output of a perfect sound that will catch everyone’s eye. You will notice a considerable boost in horsepower and torque, starting from the first ride you enjoy after installing it.

I tried to find the negative things but there is no real drawback. You can buy it with complete peace of mind.
  • Multicore design
  • Straight through technology
  • Considerable performance boost
  • Easy to install
  • None

Overall, they surely deserved a spot on my article. It is durable and helps your Tacoma reach new heights in terms of performance.

Borla 140140 Cat Back Exhaust System
We earn a commission if you click this link and make a purchase at no additional cost to you.
04/16/2022 12:54 pm GMT

8. Flowmaster 819144 Cat Back Exhaust System

Coming in at eighth place is the Flowmaster 819144 Cat Back Exhaust System. Their product started this list, and now another one of theirs is ending it. One brand getting two places on my article means that they make excellent quality exhausts that people love.

They also implements a stainless steel build, making it superior to all other exhaust materials out there.

Accompanying it is mandrel tubing, which allows it to be turned at extreme angles without flattening out or getting kinks.

Since there is no restriction for bending the tubing, the most efficient way of gas dispersal can be created, so the engine can work in a low-pressure environment at its full capacity. The gases produced by the engine have an extremely high temperature.

So, stainless steel is the exhaust’s best bet to spread that temperature as quickly as possible to prevent internal components damage.

The exterior sound is quite aggressive and is moderate for the interior. If you want a loud one that will turn heads, then rest assured that this one will not fulfill your needs and expectations, but surpass them.

You can use these in all Toyota Tacoma versions except for two. It cannot be installed in the X-Runner and the STD cab versions. So, they are better off choosing any of the above six exhausts that I have mentioned above for those people.
  • Stainless steel build
  • Mandrel-bent tubing
  • Easy to install
  • Better performance
  • It cannot be used in the X-Runner and std cab versions

Overall, they have scored a low position due to its no compatibility with two Tacoma versions. Other than that, it is an example of fine engineering that will keep you satisfied.

Flowmaster 819144 Cat Back Exhaust System
We earn a commission if you click this link and make a purchase at no additional cost to you.
04/17/2022 12:22 am GMT


Apart from the last option, every single exhaust that I have listed has little to no drawbacks because they have been built to last. Their customers well regard every brand, and there are very few negative reviews for them.

I would personally recommend the 17432 Dual Side Exhaust System by Flowmaster, when it comes to best exhaust system for Toyota Tacoma. It performs excellently, is durable, and is backed by a three-year warranty, so you can buy it with peace of mind.